Updating some old wells. Note the date these wells were drilled (the "t" date is the test date -- so "t5/07" means the well was tested May, 2007. Wells are tested about the time they are completed/fracked, and at the time these wells were drilled, they were fracked soon after.
Also note the total production to date (cum XXXK 9/15).
These wells were drilled when:
- average EUR in the Bakken was estimated to be about 350,000 bbls
- not a lot was yet known about the Bakken (where the sweet spots were; how best to complete the wells)
- when infrastructure was greatly lacking
These wells are back on active status:
- 16457, 922, EOG, C & B 1-31H, Parshall, went inactive 1/15; back on status of 9/15; t5/07; cum 434K 12/14;
- 16997, 1,520, EOG, Van Hook 1-13H, t6/08; cum 579K 9/15; placed on inactive status in 4/13; appears to be pumping again in 7/13; producing as of 7/13; again, off-line, 10/14; again, off-line as of 11/14; back on status as of 9/15;
- 17092, 3,027, Behr 11-34H, Sanish; s4/08; produced 500,725 bbls in 591 days; inactive Jan/Feb 2015; now back on status 3/15; 1.03 million 9/15;
- 17158, 4,184, Whiting, LL, Richardson Federal 11-9H, Sanish, t10/08; F; cum 895K 9/15;
- 17147, 2,101, XTO, Boucher 41X-21, Hofflund, t4/09; F; cum 700K 9/15;
- 17287, 1,137, EOG, Austin 22-31H, Parshall, t10/08, cum 861K 9/15;
- 18193, IA/1,666, OXY USA, Martin 34-31H, t10/09; cum 320K 3/15; not much production since May, 2014; is off-line; inactive; a sundry form dated 3/31/14 says that 12.28 tons of contaminated soil was removed; another well is being added to the pad; the existing tank batter and berm will be removed to ensure adequate cleanup and a new lined dike will be installed to accomodate the dual well pad;
- 18408, IA/1,945, Amber Renee 25-36H, Sanish; one mile to the west of the Chandler James; t2/10; F ; 822K 8/14 -- 661K in about two years; no pump; still 9K/month 1/13; IA 1/14; still inactive 7/15; the most recent sundry form shows this well is scheduled to be "re-drilled";
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.