- 18341, 567, HRC, Fort Berthold 147-94-1A-12-1H, t10/11; cum 644K 3/19;
- 10/7/11: an open hole, 29-stage frack, with 3 million lbs sand;
- 6/29/10: an open hole frack attempted, 200,000 lbs sand; "the well was killed after flowback frac due to fishing for wireline. This lateral has also been plugged back.
NDIC File No: 18341
Well Type: OG Well Status: A Status Date: 10/26/2011 Wellbore type: Horizontal
Location: NWNE 1-147-94 Latitude: 47.587740 Longitude: -102.594214
Current Operator: HRC OPERATING, LLC
Current Well Name: FORT BERTHOLD 147-94-1A-12-1H
Total Depth: 20442 Field: MCGREGORY BUTTES
Spud Date(s): 4/5/2010 7/5/2011
Completion Data
Pool: BAKKEN Perfs: 11119-20442 Comp: 10/26/2011 Status: F Date: 10/26/2011 Spacing: 2SEC
Cumulative Production Data
Pool: BAKKEN Cum Oil: 436269 Cum MCF Gas: 371535 Cum Water: 169174
Production Test Data
IP Test Date: 10/26/2011 Pool: BAKKEN IP Oil: 567 IP MCF: 319 IP Water: 138
A history of early production for this well:
Monthly Production Data (sorry about the formatting, but one can probably figure it out):
Pool | Date | Days | BBLS Oil | Runs | BBLS Water | MCF Prod | MCF Sold | Vent/Flare |
---|
BAKKEN | 11-2011 | 30 | 36166 | 35756 | 14238 | 29357 | 0 | 29175 |
BAKKEN | 10-2011 | 19 | 12952 | 12453 | 5471 | 7701 | 0 | 7603 |
BAKKEN | 9-2011 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
BAKKEN | 8-2011 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
BAKKEN | 7-2011 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
BAKKEN | 6-2011 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
BAKKEN | 5-2011 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
BAKKEN | 4-2011 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
BAKKEN | 3-2011 | 1 | 11 | 0 | 0 | 0 | 0 | 0 |
BAKKEN | 2-2011 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
BAKKEN | 1-2011 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
BAKKEN | 12-2010 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
BAKKEN | 11-2010 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
BAKKEN | 10-2010 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
BAKKEN | 9-2010 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
BAKKEN | 8-2010 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
BAKKEN | 7-2010 | 2 | 892 | 743 | 0 | 0 | 0 | 0 |
BAKKEN | 6-2010 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.