Wednesday, January 15, 2020

Three Second-Bench Three Forks Wells -- January 15, 2020

Re-posting:
Three producing wells (DUCs) reported as completed:
  • 34639, 601, Slawson, Wolverine Federal 12-31-30TF2H, Elm Tree, t12/19; cum --; 2nd bench, Three Forks; spudded December 16, 2018, TD on February 22, 2019; vertical drilled, January 26, 2019 - January 30, 2019; curve started immediately after completing the vertical segment; segment took 10.3 hours; landed 66 feet into the Three Forks formation; the lateral was drilled in 48.3 drilling hours; drill rates ranged from 26 to 362 feet / hour; gas ranged between 57 and 2,270 units;
  • 34603, 1,034, Slawson, Wolverine Federal 11-31-30TF2H, Elm Tree, t12/19; cum --; 2nd bench, Three Forks; spudded December 14, 2018; vertical began on February 3, 2019; completed in 65.6 hours; curve built in 9.7 hours; lateral was drilled in 48.3 drilling hours; gas units ranged between 13 and 3,260 units;
  • 34604, 458, Slawson, Wolverine Federal 10-31-30TF2H, Elm Tree, t12/19; cum --; 2nd bench, Three Forks, spudded December 16, 2018; vertical drilled in 64.4 hours, January 26 - 28, 2019; curved built in 10.3 hours; lateral drilled 48.3 hours; gas ranged from 57 to 2,270 units; compare that with gas units from 26 to 380 in the first bench, Three Forks.
I find that absolutely incredible.

Drilling the vertical in 48 hours. Completing the curves in less than 12 hours which, up until now, seemed to be the norm. Finally, the lateral drilled in 48 hours.

Frack data not yet posted at the NDIC site. FracFocus:
  • 34604, 14.3 million gallons of water; 92.7% water by mass; a huge frack; fracked 8/23 - 8/28/2019;

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.