Pages

Monday, October 14, 2019

The Bakken Never Fails To Surprise Me -- October 14, 2019

The well:
  • 32276, 433, Slawson, Gobbler Federal 4-26-35MLH, Big Bend, t6/19; cum 8K 8/19;
The graphics:




Frack data:
  • western lateral, first bench, Three Forks: 46 stages; 9.62 million lbs;
  • eastern lateral, second bench, Three Forks: 46 stages; 9.78 million lbs;
From the well file:
  • spud date: July 28, 2018 (small rig)
  • cease drilling: September 5, 2018 
  • first bench:
    • 20,708' TD
    • 10,196.20' TVD
    • 11,54796' VS
  • second bench:
    • 20,900' MD
    • 10,241.89 TVD
    • 11,602.89 VS
  • dates:
    • spudded July 28, 2019
    • lateral 1 reached TD on August 25, 2018
    • lateral 2 began at 10,659' MD on August 31, 2018, and reached TD on September 5, 2018
  • drilling hours:
    • vertical: drilled in 59.5 hours in two runs
    • curve: drilled in 15.7 hours in two runs
    • lateral 1, first bench, 55.82 drilling hours in a single run; 100% in zone;
    • lateral 2, second bench, 80.1 drilling hours in a single run; 100% in zone; gas between 246 and 5,895 units;

2 comments:

  1. So thats roughly 4-5 miles down? Amazing the precision possible by these folks. At a loss for (any more) words

    ReplyDelete
    Replies
    1. Yes, two miles down (vertically); they they turn, and go horizontally another two miles. Extended long reach horizontals go about three miles in the Bakken (rare, but exist).

      The precision is amazing: measuring the distance to the nearest inch or thereabouts, and measuring drilling hours to the nearest tenth of an hours (or six minutes).

      Delete

Note: Only a member of this blog may post a comment.