Pages

Wednesday, August 21, 2013

Oasis Reports Two Huge Wells In The Sanish Today

These two Oasis wells are on the same pad, 100 feet apart from each other. They are both in the Sanish, one targeting the middle Bakken; one targeting the Upper Three Forks (though Oasis only states "Three Forks").

There are six wells in the section neighboring these wells on the east.

This spacing unit has two other wells (see below).

The Anonsen:
  • 24079, 3,581, Oasis, Anonsen 5393 14-3B, Sanish, 36 stages, 4.1 million lbs (60c/40s); a nice well; t3/13; cum 71K 6/13; middle Bakken; drilled on same pad as the Flavin 5393 14-3T; 
  • long lateral, of course; sections 3/10, running south ("5393" = 153-93)
  • continuation of Oasis' development of the Sanish
  • spud December 6, 2012; vertical depth ~9,975, reaching KOP on December 12, 2012
  • curve build started December 21, 2012; TD reached January 23, 2013; 20,400 feet
  • gas peaked to 4,200 units
  • middle Bakken at this well is estimated at ~ 61 feet thick
  • the summary erroneously states that the Anonsen is in the Alger Field
The Flavin:
  • 24080, 2,627 Oasis, Flavin 5393 14-3T, Sanish, Three Forks, a nice well, 36 stages; 3.46 million lbs (100s); t3/13; cum 66K 6/13;
  • long lateral; parallels the Anonsen;sections 3/10, running south ("5393" = 153-93)
  • spud December 3, 2012; re-entered on the 26th; KOP reached on December 30, 2012
  • curve build started on New Years Eve, 2012, at noon; total depth of the curved on New Year's Day; TD was reached on January 13, 2013
  • highest trip agas in the lateral was 3,180 units;
  • the Three Forks target zone at Flavin is estimated at 16 feet thick (no typo)
The other two wells in this section are located in the far northwest corner of 3-153-93:
  • 17618, 881, Oasis, Langved 5393 11-3H, t8/09; Sanish, middle Bakken, cum 178K 6/13; cased hole, 2.5 million lbs (68c/32s);
  • 23476, 2,513, Oasis, Whitten 5393 11-3B, Sanish, middle Bakken; t12/12; cum 102K 6/13; 36 stages; 4 million lbs (56c/44s);

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.