Pages

Wednesday, September 8, 2010

Analysis of the Seven WLL Wells Reported Out Today

Among others, the following Whiting wells were released on today's (September 8, 2010) daily activity report:
If those IPs don't impress you, maybe the production runs will:
If you have the time, you should take a look at the NDIC GIS map server and get an idea of what's really going on in the core of the Bakken.
  1. All of these wells are in the Sanish oil field, one of the two most prolific fields in the North Dakota Bakken.
  2. All wells target the "Bakken Pool," but the Bakken Pool includes both the Middle Bakken formation and the Three Forks Sanish formation. Over time, my hunch is that there will be a 50/50 split between Middle Bakken and Three Forks Sanish wells, although all will be "Bakken Pool" wells on the NDIC reports.
  3. The wells with file numbers lower than 17800 are probably first and second generation fractured wells (that is, some single stage fracture as well as some double-figure stage fractures, but none that have seen super-fractures (40-stages and more).
  4. The wells completed after June, 2010, might be super-fracked wells, but we don't know yet. Only recently have we heard drillers talking about super-fracked wells, and it seems Slawson took the lead in this arena.
  5. Whiting is now putting as many four wells in a section. CLR does that with Eco-Pads; Whiting is doing it differently. Some argue that an Eco-Pad delays production; some say production on the first of the four wells on an Eco-Pad won't start producing oil until all four wells on the Eco-Pad are completed (I haven't confirmed that). A good example is the Arthur-Hegler CLR Eco-Pad; the first well was completed a while ago; the fourth, recently, and no news yet.
  6. All wells below are Whiting wells and all are long laterals (two sections).
So, let's take a look at these wells in more depth:
  • 17776, Annala 12-3H: parallels #16871, reported out in December, 2008, 1,567.
  • 17917, Olson Federal 42-8H: parallels 17158, reported in April, 2009, 4,184. Also in the very same section(s): 17917, June, 2010, 1,934; 17700, August, 2009, 3,889; and 18278, May, 2010, 2,895.
  • 17935, Curren 11-14H: neighbors include 17935 and 18536. The former reported out in June, 2010, 3,311; and the latter reported out in December, 2009, 1,640. The latter (18546) was a TFS well, as others in this posting probably are.
  • 18003, Holmberg 33-24H: parallels 17284, May, 2009, 1,152; and 17240, April, 2009, 1,680.  18947 is still confidential and 19366 is a brand new permit.
  • 18359, Rohde 43-1H. There are four other wells in the immediate vicinity of this well. 17603, October, 2009, 2,825; 18297, April, 2010, 2,987. All five of these wells are in the same section except for 18399 (the Rohde 43-1H0 which is in section 1-153-92, right on the border of 6-153-91 where the other four wells are.
  • 18462, TTT-Ranch 12-25H: parallels 18004, January, 2010, 1,582; 18462 is in the same immediate area but still confidential.
  • 18559, Platt 43-28H, is right next to 18213, May, 2010, 3,609.
Bottom lines:
  • I don't think one has to look at individual wells to see what is going on. Just look at the IPs above, and realize that there are a minimum of four wells in rock-throwing distance of each other (I can't throw very far).
  • WLL is reporting outstanding IPs on wells that are targeting both the TFS and the MB from the same section in the core of the Bakken.
  • The general consensus is that the Bakken formation and the TFS formation do not communicate; I think the jury is still out on that, but I don't think it matters. It appears that tapping into one formation has no effect on wells in a formation immediately above/below it.
  • Older wells with one-stage fractures and low double-digit fractures are probably candidates for increased fracturing in the future.
  • I think everyone is underestimating the amount of oil that is going to be taken out of the core Bakken; I don't think the producers are talking about that. 
Coffee table conversation: these wells are going to pay for themselves in the first year of production, and will continue to produce for thirty years. The decline rate will be horrible. Production will level off. They will be re-fracked seven years from now. Leases will be held indefinitely by production. EUR/well in the core Bakken will exceed 900,000 barrels. If there are four wells in a section, that works out to almost 4 million barrels per section EUR in the core Bakken. There are thirty-six sections in a township in North Dakota. There are about six full townships in the Sanish oil field.  Price of oil will trend higher over the next twenty years.

    2 comments:

    1. Check out EOG's VAN HOOK 7-23H. 87.1k bbls in a little over two months. Being a 640, a real whopper!

      Monthly Sales Data:
      Date Oil
      7-2010 34290
      6-2010 49586
      5-2010 3224

      ReplyDelete
    2. This is file #18504. I believe it is still confidential and I haven't found link to show these numbers.

      This is an interesting. This permit (18504), including the location, once belonged to Slawson. On January 27, 2010, that permit was canceled because it expired. That permit/location was subsequently picked up by EOG.

      ReplyDelete

    Note: Only a member of this blog may post a comment.